I had to take a break from the #gilmoregirlsrevival to go pick up this beauty! I have been dreaming of this painting for over 2 years. I am missing my Nashville families something fierce and after my first full week at my new life in Omaha, this came in the perfect time! I seriously am so blessed. #copperboom "Protect her all the days of her life"

Beautiful rug was made by a friend.  She doesn't make them anymore but you can check out her blog here: wanderers hearth

As you can see the table used to have a glass top. I had dreams of a black metal framed table with a gorgeous stained wood top. I gave myself my budget and started searching the internets. My budget for the whole table start to finish was 80. Which meant the frame had to be cheap because the wood would not be. The ones online are well over $150 so this was going to be a challenge.

I finally settled on this table. I got it from a guy on craigslist who was probably the biggest pot head EVER. He had it listed for $50. I offered $30 he said ok. For some odd reason when I went to pick it up, I completely forgot to stop and get cash so all I had was $20 and he was more than happy to give it to me ha ha!

SO I loaded it up. Mind you, the evening I picked it up, I was watching my friends little boy while she was in the hospital on bed rest with her last pregnancy. He had a tendency to get carsick in my car. So I used that as my excuse of why I forgot to get cash because I had to stop on the side of the road and clean up vomit all over my car. Plus I now had a naked kid in a carseat with me. He was either too high to care or just felt bad for me. Either way it worked in my favor.

I got the table home and realized it was a table for little people. Sitting on the floor it went to the middle of my shins. I instantly ran to home depot because I knew this wouldn't work for me and purchased some casters to attach to the bottom. Sadly since this was such a fast project I have no photos of that process or a price point. They were super easy to attach though and once I added them it added a good 4 inches to the table and I was pleased.

final choice

My personal shopper at home depot

The board before I glued them.

Originally I planned on having a reclaimed wood top for the table. But after visiting a local wood shop and pricing it out I realized that was not at all in my budget. I told myself I would just do it at a later date if I loved the table enough. So I went back to home depot with my measurements and pieced together some finished boards and asked them to cut them to the length I needed. Grabbed some wood glue and headed home.

The next phase of this project still makes me laugh and had I not spilled soda on my computer I would have the photos to prove the hilarity in it hall. You will just have to take my word for it.  When I have a project in mind I do not like to take my time on them. I NEED them done as soon as I start it or it will drive me crazy unfinished. The thought of waiting and doing it like any real craftsman would just wasn't an option. I laid wax paper of the glass top of the table, put glue on the side of the boards and pieced them together. Laid it down on top of the table the way I liked it and hoped for the best. The guy at home depot tried to convince me to buy clamps for the next part because the wood needed to be held in place while the glue dried or it would now dry flat and even. I humored him and walked over the the isle that sold the clamps. Saw the price of them and left without them as fast as I could. CLAMPS were not in my budget- so what is the next best thing? FLOWER POTS AND CINDER BLOCKS!

You heard that right. For 48 hours I had two cinder blocks and two 15 pound giant outdoor planters full of mums sitting on my coffee table weighing the boards down until the glue dried. While a couple of the boards are not 100% flat in some parts, for the most part- I have to say my plan worked!

After this, I let it sit for a few days until I decided what I wanted to do with stain. As I mentioned before my original plan was to have a black metal framed table and reclaimed wood on top. Looking at my living room I realized how much the black frame would stand out and decided to leave it silver. This meant I needed a good stain that would match the silver and not be too match to my mantle boards. Sadly I do not remember what color I chose, but it was a nice grayish Minwax stain.

I have to say it turned out pretty great and I get compliments on it quite often. I love looking back at these pieces and smiling at the process that was to get them where they are now. To me, that is way better than buying it from the store and being in the pore house ;).   I hope you enjoyed this post. Stay tuned for more!

Yes, its Gilmore Girls. Yes I am ALWAYS watching it.

This is just pieces of different sized wood pieced together, hammered and stained to fill in the arch

So as you can see from the top photo I filled my arch with wood logs. Something that is always shocking to people and a surprise to understand is that those logs are 3/4th to one inch pieces of branches cut up ha ha! When I was home for Christmas last year I shared with my Granny and Papa how my dream mantle would be filled with what looks like fire wood. When I bough the mantle I had visions of having a three detention fo-wall in the arch lined with houndstooth tile or barn wood, but after many trips to home depot, and MANY discussions with the men there they talked me out of it every time. I do not have the tools or the budget to do this, plus the depth to the wall was not as deep as I had envisioned so nothing would have been able to sit inside the fireplace anyways. So what is the next best thing?! Firewood!

My Pappa cutting tree branches from a family friends yard.

To start, I bought an extra tall trifold poster board.  Target was the only place I could find one tall enough but so many supply and craft stores have them in different sizes.

Then I slide the poster board behind the mantle. I have 2 inch gap between the mantle and the wall how it sits. I traced the arch of the mantle and pulled the board back out.

Took the board outside and sprayed the poster board black, inside and a bit outside of the traced arch. That way if there are any gaps in the wood it will be dark and not be noticeable on depth.

After that dried I attached the wood pieces.  First I laid them all out on the board how I would like them and went through and glued them down. I had to do this part in two steps because I ran out of wood. The first time I attached the pieces I used a glue bond that I had in my house from an old project on my coffee table (next post) It probably wasn't what I should have used, but as we discussed I wanted to stay on my budget. The second time I used my hot glue gun. I would not recommend that. The strings where everywhere and they are not as bonded to the board as they could be and in time will snap off with the glue.

The best part of this project is that it slides in and out for easy access to my outlet and cable box :) No more wires, bulky boxes.


Below you can see the photos of the the process and a close up :).

attaching my first few. You can see the spray paint edge on the bottom left.

I actually liked the look with it not all the way full while I waited for my next wood delivery ;)

The finished product!